User`s manual

CHAPTER 3.0 Wiring and Installation 3-49
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
3.11 DS2110 Control Input and Outputs
The following section contains a description of the control related Input/Output (I/O) available to the user.
Functionality of this I/O is detailed later in this manual.
Digital
Inputs
Digital
Outputs
Drive
Ready
Figure 3.42 DS2110 I/O Connections
NOTE - An external 12Vd.c. to 32Vd.c. power source (user supplied) is required for the I/O functions.
The amperage rating of this power source will depend on the number of I/O functions used. Supply
currents can be calculated as a function of this number and the input and output impedances quoted
below.