User`s manual

APPENDIX B – GUI B-47
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
B.2.16.51 Software Status Byte 1
SOFTWARE STATUS BYTE 1 :
• Programming Fault → This is an internal software fault and should never occur
• Programming Warning → Indicates a fieldbus software warning
• Rate Task Initialisation → Indicates that a fault occurred during the initialisation of the periodic tasks
• NVM Address Out of Range → Indicates that an attempt was made to access an address outside the range of
valid NVM addresses
• Error Handler → Indicates an error initialising the error handler