User`s manual

APPENDIX B – GUI B-42
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
B.2.16.42 Board Status Byte 3
DIGITAL BOARD STATUS BYTE 3 :
• COM2 loopback → The result of the loop back test performed during initialisation of the drive.
• COM2 initialisation → The result of the COM port initialisation
• QSPI Initialisation → The result of the QSPI initialisation
B.2.16.43 Board Status Byte 4
DIGITAL BOARD STATUS BYTE 4 :
• TPU Initialisation → The result of the TPU initialisation.