User`s manual

APPENDIX B – GUI B-5
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
B.2.9 Panel View
The Panel View is one of the four large panels in the Main Window. It is located at the top right of the Main
Window, directly under the Status Bar. The Panel View can be empty, or contain one or more configuration
specific panels. Clicking on nodes within the Navigator tree typically opens these panels. The panels displayed in
the Panel View are the main area of interaction between the user and the controller. They are typically used to
display controller parameters and to modify the values of these parameters. To open panels in the Panel View,
use the tree in the Navigator panel, described in the previous section.
B.2.10 Panel View Toolbar
The Panel View Toolbar consists of the following buttons.
Continuous Update
If the Continuous Update toggle button is depressed, all controls within the displayed panel are continuously
updated from the controller via a parameter read.
Write All
Clicking the Write All button forces a parameter write for each control displayed within the panel.
Read All
Clicking the Read All button forces a parameter read for each control displayed within the panel.