User`s manual

CHAPTER 1.0 Overview 1-9
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
1.6 General Functional Specifications
1.6.1 Digital Inputs (J2A)
• 8 Digital Inputs, user configurable
• Digital Input 1 Dedicated to High Power Enable
• All Optically Isolated, 12…36V Input Range.
• 5k input impedance.
STANDARD FUNCTION
FIELDBUS OR INTERFACE SPECIFIC
High Power Enable Input High Power Enable Input
Auto / Manual Mode See Section 5.9
Torque / Velocity Mode Switch See Section 5.9
Brake Control See Section 5.9
CW Limit Switch See Section 5.9
CCW limit Switch See Section 5.9
Quick Stop See Section 5.9
Controlled Disable See Section 5.9
Table 1.6 DS2110 Digital Inputs Overview : Standard Configuration
1.6.2 Digital Outputs (J2B)
• 3 Digital outputs, user configurable
• All outputs are Optically Isolated.
• Nominal ratings of 6V to 32V, 250mA
• Protected for supply range of –40V to 40V
• Short-circuit & reverse polarity protected
• Off-state leakage current <100μA at 0V
Standard Function
Drive Enabled
Limiting Function
User defined
Table 1.7 DS2110 Digital Outputs Overview