User`s manual

CHAPTER 4.0 Getting Started 4-13
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
4.13 Torque Mode Enable
Figure 4.12 Torque Mode Drive Enable
 Open “Function Generator”, and select ”Trq”.
 Click “Read All” to confirm the “Drive Mode Status” reads “Trq”,
 Give the drive an offset by typing “0.5” in the “Offset” textbox and click “Write All”,
 Click enable button (
).
 The Drive will start to accelerate in a clockwise direction until it reaches maximum velocity.
 Disable drive using disable button ( ).