User`s manual

CHAPTER 4.0 Getting Started 4-3
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
4.5 Controller Access
At this stage the Windrive software should be able to communicate with the DS2110 controller and the Status bar
in the upper right hand corner should be green and read “Read Successful (Controller ACK)”
If the status bar is red and reads “Serial Port Timeout Error”, ensure power is applied and check all serial
connections and Port settings.
Figure 4.2 Access level Password
The WinDrive Software should now be functional and DS2110 Controller ready to be configured with the users
particular parameters.