User`s manual

CHAPTER 3.0 Wiring and Installation 3-62
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
3.13.6.3 Digital Outputs
- Fixed connector: 5 pins, male connector
- Mating connector, 5 pins spring cage, female, supplied with the drive. Phoenix Contact (Part # FK-MC 0.5/5-
ST-2.5)
- Wiring: cable. 28-20AWG (0.14-0.5mm
2
)
- Wire stripping: 8 mm
Pos. Name Function
J2B.1 Ext 24V DC +24V Digital Output Supply
J2B.2 O1 Digital Output #1 User Configurable
J2B.3 O2 Digital Output #2 User Configurable
J2B.4 O3 Digital Output #3 User Configurable
J2B.5 Ext 24V Ret Digital Output Return
3.13.6.4 Drive Ready
- Fixed connector: 2 pins, male connector
- Mating connector, 2 pins spring cage, female, supplied with the drive. Phoenix Contact (Part # FK-MC 0.5/2-
ST-2.5)
- Wiring: cable. 28-20AWG (0.14-0.5mm
2
)
- Wire stripping: 8 mm
Pos. Name Function
J2C.1 Drive Ready 1 Drive ready relay contact pin 1 Drive Ready Relay Contact
J2C.2 Drive Ready 2 Drive ready relay contact pin 2 Drive Ready Relay Contact
3.13.6.5 Motor Brake
- Fixed connector: 4 pins, male connector
- Mating connector, 4 pins spring cage, female, supplied with the drive. Phoenix Contact (Part # FK-MCP
1.5/4-ST-3.81)
- Wiring: cable. 28-16AWG (0.14-1.5mm
2
)
- Wire stripping: 9 mm
Pos. Name Function
J2D.1 24V DC Brake 24V Supply
J2D.2 + Brake +
J2D.3 - Brake -
J2D.4 24V RET Brake 24V Supply Return
3.13.6.6 Fieldbus
- Refer to the appendix for details on a specific Fieldbus connector