User`s manual

DS2100 User's Manual SECTION 3: WIRING AND INSTALLATION
PAGE 3-38 C27750-001
Pos.
Name
Function
J6.1 DC- DC Bus (-)
J6.2 DC+ DC Bus (+)
Table 3.3-9 J6, DC Bus connector, µA Size
3.9.2 A & B Size DC Bus Inter-connection
Tie screen to chassis via
EMC bracket. See Section 2
L1 L2 L3 PE
(J6.4)(J6.5)(J6.6) Stud
Connector J6
DC- DC+
(J6.1) (J6.2)
DS2100 A & B
L1 L2 L3 PE
(J6.4)(J6.5)(J6.6) Stud
DC- DC+
(J6.1) (J6.2)
DS2100 A & B
a.c. Mains
L1
L2
L3
Protective
Earth
Connector J6
Figure 3.26 Size A & B DC Bus Inter-connection
- Fixed connector: 10 pins, male connector
- Mating connector, 10 pins, female, supplied with the drive. Phoenix Contact (Part # PC4 HV/10-ST-7.62)
- A size wiring: cable 14AWG (2.1 mm
2
). Wire stripping: 7 mm
- B size wiring: cable 14AWG (2.1 mm
2
). Wire stripping: 7 mm
- PE Stud wiring: cable 6 AWG (13mm
2
)
- Tightening torque: 0.5Nm.
Pos.
Name
Function
J6.1 DC- DC Bus (-)
J6.2 DC+ DC Bus (+)
Table 3.3-10 J6, DC Bus connector, A,B Size