User`s manual

DS2100 User's Manual APPENDIX B: GUI
PAGE B-94
B.3.16.77 Drive Status Byte 2
DRIVE STATUS BYTE 2 :
• Enable Attempted → Indicates that an attempt was made to enable the drive when the conditions for
enabling were not valid (e.g. hardware enable false).
• Encoder Supply → Indicates an encoder supply fault.
• Motor Thermal Foldback Warning → Indicates that the temperature is within 10% of the start temperature
for motor thermal foldback
• Dead-time Generation → Indicates a fault in the PWM dead-time generation.
• Bridge Thermal Foldback Warning → Indicates that the temperature is within 10% of the start temperature
for bridge thermal foldback