User`s manual

DS2100 User's Manual APPENDIX B: GUI
PAGE B-88
B.3.16.71 Power Status Byte 2
POWER STATUS BYTE 2 :
• 3.3 V Supply → Indicates whether the 3.3 V supply is OK.
• 24 V Supply → Indicates whether the 24 V supply is OK.
• +15 V Supply → Indicates whether the +15 V supply is OK.
• -15 V Supply → Indicates whether the -15 V supply is OK.
• Power Down Interrupt → Indicates whether the power goes down (low V
DC
).
• Bus Voltage Unstable → Indicates whether the bus voltage is unstable.
• Regen Max. On Time Exceeded → Indicates whether the regeneration exceeds the max limit on time
• 2V Reference → Indicates whether the 2V reference is OK.