User`s manual

DS2100 User's Manual APPENDIX B: GUI
PAGE B-78
B.3.16.61 Board Status Byte 1
DIGITAL BOARD STATUS BYTE 1 :
• FPGA Configuration Transmission → Indicates if there is a fault in FPGA configuration transmission.
• DSP Programming → Indicates there is a DSP programming fault.
• QSPI Loopback → Indicates there is a QSPI loopback fault.
• Ambient over temperature → Indicates that the ambient temperature is greater than the programmed limit.
• Ambient Thermal Foldback Warning → Indicates that the ambient temperature has reached 90% of the set
temperature at which point thermal limiting begins.
• Ambient Thermal Warning → Indicates that the ambient temperature has reached 90% of the set
temperature at which a thermal fault occurs.