User`s manual

DS2100 User's Manual APPENDIX B: GUI
PAGE 70
B.3.16.54 Resolver Parameters
The Resolver Parameters panel allows the user to set the parameters of this motor position feedback
sensor.
• Resolver Poles → The number of resolver poles.
• Resolver Transformer Turns Ratio → A physical characteristic of the resolver, which determines
the amplitude of the resolver reference.
• Resolver reference amplitude → This is the voltage output from the DS2100 to drive the
resolver.
• Resolver position → The multi-turn position derived from the resolver input position and used as
feedback in the position loop if resolver position is selected for the position loop feedback
• Resolver commutation position → The electrical angle of the resolver. Depending on the pole
count of the resolver this value is proportional to the mechanical angle.