User`s manual

DS2100 User's Manual APPENDIX B: GUI
PAGE 66
B.3.16.51 Digital Input Configuration
The Digital Input Configuration panel allows the user to set digital input parameters.
There are 8 digital inputs on the DS2100. The first digital input is hardwired to always be used for drive
enable, the drive can be enabled when this input is high, and the drive is always disabled when the input
is low. This digital input can additionally be configured with a function, but it retains its hardware enable
function as well. The other 7 inputs are user-configurable.
DIGITAL INPUT CONFIGURATION :
Digital input 0 (the drive enable input) is not available for configuration on this panel