User`s manual

DS2100 User's Manual APPENDIX B: GUI
PAGE 56
B.3.16.41 Continuous Bus Voltage
The Continuous Bus Voltage panel shows the bus voltage status and allows the voltage limits to be set.
• Detected Bus Voltage (V) → The actual value of the bus voltage.
• Over Voltage Limit (V) → The bus voltage at which a bus over-voltage fault is indicated.
• Under Voltage Limit (V) → The bus voltage at which a bus over-voltage fault is indicated. This
is read only, the value being set by the percentage parameter.
• Under Volt. Limit % of Vdc Nom. (%) → The percentage of the nominal voltage that will be
used as the under voltage limit.