User`s manual

DS2100 User's Manual APPENDIX B: GUI
PAGE B-22 C27750-001
B.3.16.12 DS402 Factor Group Output
The DS402 Factor Group Output panel allows the user to view factor group output parameters for scaling
between physical units used by the user , and internal units of the drive.
• Position Factor - Numerator/Denominator (position units to increment) → This parameter
allows the user to see the position factor fraction. The fraction’s value depends on input
parameters.
• Vel. Encoder Factor - Numerator/Denominator (velocity units to incs./sec) → This parameter
allows the user to see the vel.encoder factor fraction. The fraction’s value depends on input
parameters.
• Velocity Factor 1 - Numerator/Denominator (velocity units to RPM) → This parameter allows
the user to see the velocity factor 1 fraction. The fraction’s value depends on input parameters.
• Velocity Factor 2 - Numerator/Denominator (pos.enc.res./vel.enc.res.) → This parameter allows
the user to see the velocity factor 2 fraction. The fraction’s value depends on input parameters.
• Acceleration Factor – Numerator/Denominator (Accel. units to incs./sec^2) → This parameter
allows the user to see the acceleration factor fraction. The fraction’s value depends on input
parameters.