User`s manual

APPENDIX B: GUI DS2100 User's Manual
C27750-001 PAGE B-5
B.3 Getting Started / Common Features
B.3.1 Introduction
Moog WinDrive is a graphical user interface (GUI) application that is used to configure Moog Servo-
Drives. It has been developed to provide a common “look and feel” for configuring a wide range of Moog
controllers. For each controller or controller family there is a corresponding configuration within
WinDrive. A particular configuration is chosen on startup of WinDrive. The chosen configuration will
determine which controller specific dialogs and panels are displayed within WinDrive and which protocol
is used to communicate with the controller.
B.3.2 Starting WinDrive
From the Windows Start menu, select Start/Programs/WinDrive/WinDrive GUI to launch the application.
B.3.3 Launcher
The Launcher dialog box is displayed after starting WinDrive. It displays the available configurations
available for the particular release of WinDrive. Note that depending on what Moog product WinDrive
was shipped with, the list of available configurations may differ. When the Launcher dialog is displayed,
select the required configuration.
To determine which version is required look at the model number label on the drive:
For a drive named G361-xxxxA-00-000 or G361-xxxxA-01-000 select DS2100v0.1.
For a drive named G361-xxxxA-02-000 select DS2100v0.2.
Click “Open”.