User`s manual

SECTION 5: DS2100 FUNCTIONAL OVERVIEW
DS2100 User's Manual
C27750-001
Table 5.36 Monitored Powers
5.12.2 Faults and User Indication in the DS2100
This section outlines the user indication that is present on the DS2100. The drive will, depending on its state,
indicate via the 7-segment display, various messages to the user. These messages generally reflect the state of
operation of the drive and any faults that may be present.
The DS2100 distinguishes between faults and warnings. Faults are those abnormal conditions that are of a serious
enough consequence to cause the DS2100 to halt operation. This will always result in removal of power from the
DS2100 high power amplifier, and will usually result in application of a motor brake, if present,
Warnings are those abnormal conditions that do not in themselves yet constitute a peril to the equipment or to
personnel.
Display Status Description
0 Logic voltage applied, High voltage
applied. No faults present. Drive
ready to be enabled
I Drive Enabled
U* (Table 5.38) U* Warning state & No faults
present
F* (Table 5.39) Fault on drive
Table 5.37 7-Segment Display Indication