User`s manual

SECTION 3: WIRING AND INSTALLATION DS2100 User's Manual
C27750-001 PAGE 3-77
3.14.5 E Size Power Stage
- Fixed connector: 14 pole, screw terminal
- Pos 1,2: Cable 14 AWG (2.1 mm
2
) , Stripping 9mm , Torque 0.7Nm
- Pos 3,4: Cable 2 AWG (34 mm
2
) , Stripping 19mm , Torque 4Nm
- Pos 5-14: Cable 1 AWG (42 mm
2
) , Stripping 24mm , Torque 8Nm
Pos.
Name
Function
J9.1 24V fans
Voltage inputs 24Vdc fans ±10%, 2A
J9.2 0V fans
J9.3 RR Regeneration Resistance
J9.4 DC+(RR) DC Bus (+)
J9.5 PE Protective Earth Screw Terminal
J9.6 L1
Phase "L1", three-phase voltage input 230/460Vac ±10%
J9.7 L2
Phase "L2", ", three-phase voltage input 230/460Vac ±10%
J9.8 L3
Phase "L3", ", three-phase voltage input 230/460Vac ±10%
J9.9 PE Motor Protective Earth
J9.10 U Motor Phase U
J9.11 V Motor Phase V
J9.12 W Motor Phase W
J9.13 DC+ DC Bus (+)
J9.14 DC- DC Bus (-)
- Fixed connector: 2 pins, male connector
- Mating connector, 2 pins, female, supplied with the drive. Wago (Part # 231-102/026-000)
- E size wiring: cable 14 AWG (2.1 mm
2
).
- Stripping Length 8mm
Pos.
Name
Function
J8.1 24V +24V Logic Backup Supply
J8.2 0V Logic Supply Return