User`s manual

SECTION 3: WIRING AND INSTALLATION DS2100 User's Manual
C27750-001 PAGE 3-67
3.12.2.1 Drive Ready Relay
The DS2100 provides 1 relay output on connector J2C. This relay closes when the drive is ready and no faults are
present.
- Fixed connector: 2 pins, male connector
- Mating connector, 2 pins spring cage, female, supplied with the drive. Phoenix Contact (Part # FK-MC 0.5/2-ST-
2.5)
- Wiring: cable. 28-20AWG (0.14-0.5mm
2
)
- Wire stripping: 8 mm
Pos.
Name
Function
J2C.1 Drive Ready 1 Drive ready relay contact pin 1 Drive Ready Relay Contact
J2C.2 Drive Ready 2 Drive ready relay contact pin 2 Drive Ready Relay Contact
Table 3.3-31 J2B, DS2100 Digital Output connector
The following electrical description applies to the Drive ready relay of the DS2100.
J2C.1
Drive Ready 1
Drive Ready
Relay
J2C.2
Drive Ready 2
5V
Figure 3.3.50 Drive Ready Relay Output
Note that:-
 Closed when drive ready and no faults.
 Max. voltage 36 V
 Max. contact current 100 mA