Operating instructions

ManualsBrandsMoog ManualsSecurity CamerasCVFC2-S25

Moog Inc.

Sensor and Surveillance Systems

3650 Woodhead Drive Northbrook, IL. USA 60062

+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com

Installation and Operation Instructions

Before attempting to connect or operate this product, please

read these instructions completely.

81-IN5495 111113

CVFC2-S25

Enhanced Vehicle Detection Camera System

CVFC2-S25................ Environmentally Enclosed Camera System, 120Vac input, feed through wall / pole mount, adjustable sunshield, internal surge

suppression, 128x wide dynamic range, 25x zoom, co-ax, RS-485

Summary of content (11 pages)

PAGE 1
Installation and Operation Instructions Before attempting to connect or operate this product, please read these instructions completely. CVFC2-S25 Enhanced Vehicle Detection Camera System CVFC2-S25................Environmentally Enclosed Camera System, 120Vac input, feed through wall / pole mount, adjustable sunshield, internal surge suppression, 128x wide dynamic range, 25x zoom, co-ax, RS-485 Moog Inc. Sensor and Surveillance Systems © 2013, Moog Inc.
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 9 SAFETY PRECAUTIONS Cable Runs- All cable runs must be within permissible distance.
PAGE 3
Product Warranty Registration Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell. See full warranty details at www.moogS3.
PAGE 4
Limited Warranty for Moog Products Moog - Decatur Operations, subsequently referred to as “Manufacturer,” warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics Five (5) Years Accessory Brackets Five (5) Years Controllers Three (3) Years Power Supplies / IR Illuminators Three (3) Years Poles / PolEvators™ / CamEvator Three (3) Years Warrior Series™ / Q-View™ Three (3) Years SView Series Three (3) Ye
PAGE 5
! Electrical Specifications CVFC2-S25 Power 120Vac Class 2 Only 120Vac: 17 watts Heater (16 watts), Blower (1 watt) Tools Required: Phillips head screwdriver 120Vac: 17 vatios Calentador (16 vatios), soplador (1 vatio) English Herramientas requeridas: Destornillador principal Phillips Español 120Vac: 17 watts Réchauffeur (16 watts), ventilateur (1 watt) Outils requis : Tournevis phillips 120Vac: 17 Watt Heizung (16 Watt), Gebläse (1 Watt) Werkzeuge erfordert: Kreuzkopfschraubenzieher 120V
PAGE 6
1 2 Twist Rotate Lossen and then rotate the wall mount to achieve the proper orientation. • Afloje y gire el soporte de pared para conseguir la orientación adecuada. • Desserrer et puis tourner le support mural pour atteindre le bon sens. • Lösen und drehen Sie dann die Wandhalterung, um die richtige Ausrichtung zu erreichen. • Solte e, em seguida, gire o suporte de parede para alcançar a orientação adequada. • Allentare e quindi ruotare il supporto a parete per raggiungere il corretto orientamento.
PAGE 7
6 5 TAB * Max Strap Width: 0.75” Attach mount to pole with suitable hardware (not provided). • Ate el montaje al poste con el hardware conveniente (no proporcionado). • Attachez le bâti au poteau avec le matériel approprié (non fourni). • Bringen Sie Einfassung zum Pfosten mit der verwendbaren Hardware an (nicht bereitgestellt). • Una a montagem ao pólo com a ferragem apropriada (não fornecida). • Attacchi il supporto al palo con fissaggi adatti (non forniti).
PAGE 8
9 Pass cables through wiring membranes (use screwdriver to pierce). Hinge the housing closed and tighten (2) rear screws. . • Pase los cables a través de las membranas del cableado (el destornillador del uso a perforar) . • Passez les câbles par des membranes de câblage (le tournevis d'utilisation à percer). • Führen Sie Kabel durch Verdrahtungsmembranen (zu durchbohren der Gebrauchschraubenzieher) . • Passe cabos através das membranas da fiação (a chave de fenda do uso a perfurar). .
PAGE 9
12 Camera installed by Moog Videolarm. Refer to instruction 81-IN5494 (INCLUDED) for camera manual. • Cámara instalada por Moog Videolarm. Consulte las instrucciones de 81-IN5494 (incluido) para manual de la cámara. • Caméra installée par Moog Videolarm. Reportez-vous aux instructions 81-IN5494 (INCLUS) pour manuel de l'appareil. • Kamera durch Moog Videolarm installiert. Siehe Anweisung 81-IN5494 (im Lieferumfang enthalten) für Kamera-Handbuch. • Câmera instalada por Moog Videolarm.
PAGE 10
15 Close the housing lid and securely tighten the (2) lid screws. 16 The camera tray can be securely locked into place with the provided 3.5 x 7mm screw. Tighten it through the rear tray tab. .• La bandeja de la cámara se puede trabar con seguridad en lugar con el .• Cierre la tapa de la cubierta y apriete con seguridad (2) los tornillos • • Fermez le couvercle de logement et serrez solidement (2) les vis de couvercle.
PAGE 11
Replacement Parts CVFC2-S25 3 1 4 5 # 1 2 Part Number RPVL3948 RPVL3950 Description FCH Camera Tray FCH Heater + Bracket 3 RP76VL2016 FCH 12VDC/24VAC PCB 4 RPFD080 12VDC 40mm Fan 5 RPVL3953 Cable Membrane (0.