Specifications
- 3 -
Figure 8
CAMERA FOCUSING (Figure 8)
1. The camera is factory equipped with a 3.6mm xed lens. A
2.5mm lens is also provided. To remove the 3.6mm lens, loosen
the set screw and unscrew the lens counter-clockwise.
2. Fine focusing of the lens: Loosen the set screw in the lens mount
and manually rotate the lens until a clear picture is achieved. Once
the focus is set, retighten the set screw.
Set screw
Fixed lens
CAMERA SETTINGS
SERIAL NUMBERS BEGINNING WITH YK
FIXED AND FIXED VARI-FOCAL LENSES. There are no user
adjustable settings on these units (Figure 9).
Figure 9
BW Fixed and Vari-Focal
NOTE:
To determine which camera is used in your unit, locate the
serial number on the inside of the housing. Match the two
letter prex with the corresponding instructions included
here for adjustments.
SERIAL NUMBERS BEGINNING WITH CT
FIXED AND FIXED VARI-FOCAL LENSES. There are no user adjust-
able settings on these units (Figure 14).
Figure 14