Specifications
- 5 -
3.4 AUTO TOUR DWELL
Auto tour Dwell defi nes how long the pan/tilt will stay at each preset
in the auto tour. This parameter is preset in the pan/tilt, but the
VLC485 allows you to override that setting via the menu if this feature
is supported by the pan/tilt. A range from 3 to 99 seconds can be set.
SET AUTOTOUR DWELL:
Use the POUND (#) key to
scroll to Set Auto tour Dwell
mode.
Use the keypad to enter the
desired dwell time. Press the
POUND (#) key to select. Press
MENU to exit the menu mode.
Press the MENU button. Enter
password if necessary.
30
SET AUTOTOUR DWELL:
3.5 BEEP ENABLE
Also, if enabled, a brief beep will sound when each button is pressed.
To prevent damage to the joy stick, a beep sound is activated when-
ever the joystick is at its maximum position. This function can be
disabled in the Menu Mode.
BEEP ENABLE
YES
Use the POUND (#) key to
scroll to Beep Enable. The cur-
rent setting will be displayed.
Press the STAR (*) key to
change the setting. Press the
POUND (#) key to select. Press
MENU to exit the menu mode.
Press the MENU button. Enter
password if necessary.
BEEP ENABLE
NO
3.6 SEQUENCING
Sequencing allows you to view up to 16 cameras in a specifi c order.
The sequence can be set and reviewed and cameras can be added
or subtracted using the Menu Mode.
SEQUENCE - ADD CAM:
05
Use the POUND (#) key to
scroll to Sequence. If a
sequence is already set the fi rst
camera in the sequence will be
displayed.
Press the MENU button. Enter
password if necessary.
SEQUENCE - ADD CAM:
You can review the existing
sequence by pressing the
SEQUENCE button. Each time
you press it the next camera
will be displayed. When a blank
appears, that will be the end of
the sequence.
1, 2, 3...
3.6.1 TO REVIEW A SEQUENCE
A blank space will appear after
the last camera of the current
sequence.
3.6.2 TO ADD A CAMERA TO A SEQUENCE
A sequence may contain up to 16 camera entries. If you have not
fi lled a sequence and would like to add cameras to it, do the follow-
ing.
To add a camera to the existing
sequence enter the camera
number on the key pad.
Press the STAR (*) key, then
press the SEQUENCE button.
At that point another blank
space will appear. You may
add another camera to the
sequence at this time (up to
a total of 16), or press the
SEQUENCE button again to
review your entries.
SEQUENCE - ADD CAM:
21
1, 2, 3...
Usiing the SEQUENCE button,
scroll through the sequence
until you reach the camera you
want to change.
3.6.3 TO CHANGE A CAMERA IN A SEQUENCE
You may change any entry in a sequence at any time. Remember
that these changes overwrite your existing sequence.
SEQUENCE - ADD CAM:
17
Using the keypad, enter the
number of the camera you want
to use.
Press the STAR (*) key, then
press the SEQUENCE button.
The number of the next cam-
erea in the sequence will
appear. Press the SEQUENCE
button again to continue to
review your entries.
SEQUENCE - ADD CAM:
08
1, 2, 3...
Press the MENU button. Enter
password if necessary. Use the
POUND (#) key to scroll to
Sequence.
Press the MENU button. Enter
password if necessary. Use the
POUND (#) key to scroll to
Sequence.
Press the MENU button. Enter
password if necessary. Use the
POUND (#) key to scroll to
Sequence.
1, 2, 3...
Using the key pad, enter 00.
Press the STAR (*) key, then
press the SEQUENCE button.
The sequence will be blank.
3.6.4 TO CLEAR THE SEQUENCE
Press the MENU button. Enter
password if necessary. Use the
POUND (#) key to scroll to
Sequence.
SEQUENCE - ADD CAM: