Operating instructions

ManualsBrandsMoog Videolarm ManualsSecurity Camera AccessoriesSDW16C

www.videolarm.com

SDW12 & SDP12

Outdoor/ Indoor Fixed Dome Housing

Installation and Operation Instructions for the following models:

SDP12C 12” Outdoor/Indoor dome housing with pendant mount,

clear dome, (1) ﬁxedcamera bracket

SDW12C 12” Outdoor/Indoor dome housing with wall mount, clear dome,

(1) ﬁxed camera bracket

SDP12T 12” Outdoor/Indoor dome housing with pendant mount, tinted

dome, (1) ﬁxedcamera bracket

SDW12T 12” Outdoor/Indoor dome housing with wall mount, tinted dome,

(1) ﬁxed camera bracket

SDP12CHB 12” Outdoor dome housing with pendant mount, clear dome,

24Vac input,heater/blower/thermostat, (1) ﬁxed camera

bracket

SDW12CHB 12” Outdoor dome housing with wall mount, clear dom,

24Vac input, heater/ blower/ thermostat, (1) ﬁxed camera

bracket

Before attempting to connect or operate this product,

please read these instructions completely.

CERTIFIED

81-IN5383

01-15-2009

Summary of content (11 pages)

PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 Do not block any of the ventilation openings. Install in accordance with the SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN manufacturers instructions. 8 Cable Runs- All cable runs must be within permissible distance.
PAGE 3
LIMITEDWARRANTY FOR VIDEOLARM INC. PRODUCTS VIDEOLARMINC. warrantsthis Productto be free from defectsin materialor workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosures and Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan /tour operation Poles/PoleEvators Three (3) Years /tour operation Three (3) Years Warrior/Q-View/I.R.
PAGE 4
! Electrical Specifications Power 24VAC Class 2 Only SDW12 English 24 VAC 3.33Amps Total Power: 52 Watts Accessories: Heater: 50 Watts/Blower: 2 Watts Camera Power: Not Supplied Tools Required: Housing Security Tool (provided) Molex Crimper 11-01-0197 (18-24 gauge wire) Español 24 VAC 3.
PAGE 5
1 Wall Mount Securely mount unit to wall or to appropriate adapter bracket. • Monte con seguridad la unidad a la pared o al soporte apropiado del adaptador. • Montez solidement l'unité au mur ou à la parenthèse appropriée d'adapteur. • Bringen Sie sicher Maßeinheit zur Wand oder zum passenden Adapterhaltewinkel an. • Monte firmemente a unidade à parede ou ao suporte apropriado do adaptador. • Monti saldamente l'unità alla parete o alla staffa adatta dell'adattatore.
PAGE 6
1 5 Pendant Mount 2 6 Wrap Teflon tape around the pipe threads to ensure a tight seal. Securely mount bracket to wall. Pull wiring through bracket and position grommet as shown. • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado. • Solidement parenthèse de bâti à murer. Tirez le câblage par la parenthèse et le canon isolant de position comme montré. • Sicher Einfassung Haltewinkel wall.
PAGE 7
5 9 Loop the lanyard over the set screw to temporarily hold housing. • Coloque el acollador sobre el tornillo de presión para celebrar temporalmente la cubierta. • Faites une boucle la lanière au-dessus de la vis de réglage pour tenir temporairement le logement. • Schlingen Sie die Abzuglinie über der Klemmschraube, um Gehäuse vorübergehend zu halten. • Dê laços no colhedor sobre o parafuso de fixação para prender temporariamente a carcaça.
PAGE 8
Wiring Color Code Power and Control Inputs (Outside of housing) 13 24k VAC Wiring Distances The following are the recommended maximum distances for 24 VAC with a 10% voltage drop (10% is generally the maximum allowable voltage drop for AC powered devices).
PAGE 9
14 Housing Side Camera Side Assemble fixed camera bracket. • • • • Monte el soporte fijo de la cámara fotográfica. Assemblez la parenthèse fixe d'appareil-photo. Bauen Sie örtlich festgelegten Kamerahaltewinkel zusammen. Monte suporte fixo da câmera. • Monti la staffa fissa della macchina fotografica. 16 15 Attach fixed bracket to one of the (2) square holes. • Una el soporte fijo a una (2) de las perforaciones rectangulares. • Attachez la parenthèse fixe à un (2) des trous carrés.
PAGE 10
Replacement Parts List SDW12 1 2 3 8 4 5 6 10 7 9 Part Number Description 1 WM10 WALL MOUNT KIT 2 SD0190 SDW HOUSING GASKET 3 SDH012 HOUSING TOP FOR 12” HOUSING SDH016 HOUSING TOP FOR 16” HOUSING RPFD040 UPPER BRACKET ASSEMBLY 5 RP46PKH3063 SPACER KIT 6 RPFD050 PCBOARD 7 RPFD060 CAMERA BRACKET 8 RPFD072 25 WATT, 24 VAC HEATER 9 RPFD080 BLOWER 10 CWKFD2 24VAC COLD WEATHER KIT FOR OUTDOOR HOUSING 11 RCSD12 CLEAR REPLACEMENT CAP FOR POD/ SDW/MP 123 RCSD12T TINTED REPL
PAGE 11
Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are second-to-none in the security industry.