Specifications

PRODUCT OVERVIEW
The QPT-50 Series of pan and tilts are rugged and durable for virtually any environment. The QPT-50 can handle
payloads up to 50 lb-ft of torque making it suitable for a wide range of sensors.
Integrated Control (IC) units communicate via networked PC or through a separate controller. IC units feature
integrated dual sensor serial control, lens drive, and power supply interface, making sensor integration quick and
easy. The Sentry line takes our products to the next level by utilizing stepper motor technology into the design for
more precise accuracy and broader speed control.
PRODUCT SPECIFICATIONS
Available Features
• Payloads up to 50 lb-ft (67.8 Nm)
• Digital Serial Integrated Control (IC) models
• Mounting platforms include formed tabletop with
single tilt-axis connector and 4 connector
Universal models
• Internal wire tabletop for pass-through or IC sensor
wiring on certain models
• Fixed, inverted or mobile installations
• Mil-Spec connectors
• Tough metal housing and gearing for durability in
harsh environments
• Marine conguration that meets IP66 standard
• Models available with RF pass-through connectivity
(RF rotary joint, 1 and 2 channels)
• Apollo Series meets IP67 standard
• Pressurized housing available with formed
tabletop models
• Connector (base): 43-Pin
• Connector (tilt axis): 26-Soc (1 or 4)
Sensor Integration
• Multi-Spectrum cameras
• Thermal imagers
• IR and visible illuminators
• Laser range nders
• Communication antennas
• Acoustic devices
Apollo
®
Series
Standard Conguration
QPT-50 IC Series
QPT-50 IC Series
SPECIFICATIONS
Part
Number
Conguration
Load Mount/
Interface
Nominal Voltage
Vdc
Communication
Interface
Control
Protocol
Rotation Speeds* Rotation Range
Repeatability
Pan and Tilt
Pan Tilt Pan Tilt
7-6100A IC FT-A 24 Serial / IP PTCR-20/Pelco D 1 - 25°/sec. 0.3 - 7°/sec. 435°(± 217.5°) 180°(± 90°) 0.25°
7-6100B IC FT-B 24 Serial / IP PTCR-20/Pelco D 1 - 25°/sec. 0.3 - 7°/sec. 435°(± 217.5°) 180°(± 90°) 0.25°
7-6200A ICS FT-A 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. 435°(± 217.5°) 180°(± 90°) 0.1°
7-6200B ICS FT-B 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. 435°(± 217.5°) 180°(± 90°) 0.1°
7-6300A ICS CR FT-A 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.1°
7-6300B ICS CR FT-B 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.1°
7-6600A ICMS CR Apollo FT-A 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
7-6600B ICMS CR Apollo FT-B 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
7-66000 ICMS CR Apollo Universal 24 Serial / IP PTCR-96/Pelco D .005 - 50°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
7-66480 ICMS CR HS Apollo Universal 48 Serial / IP PTCR-96/Pelco D .005 - 60°/sec. .005 - 12°/sec. Continuous 180°(± 90°) 0.05°
ICM - Marine / Brush Motor, ICMS - Marine Sentry (Stepper), CR - Continuous Rotation, HS - High Speed
Serial: RS-232, RS-422, IP: Ethernet TCP/IP
* At stated load capacity and nominal voltage
FT – Formed Tabletop
Pan & Tilt Positioners
www.moogS3.com
48
IP67
IP66