Specifications

Explosion Proof_Camera Systems – PTZ Network
www.moogS3.com
PRODUCT OVERVIEW
The EXO Explosion Proof High Denition (HD) Network Camera Systems, with H.264 and ONVIF support, are the
professional’s choice for capturing brilliant, 1080P full HD video in hazardous environments. The Division 1 EXO Camera
is designed for the most hazardous areas in explosive environments. These are usually the areas in the immediate
area surrounding the source of the fumes and dust – and therefore require the highest degree of explosive prevention.
Using the pressurization method – these Class I, Division 1 systems allow users to install cameras wherever a need for
surveillance exists, where even ameproof (Ex d) protected systems cannot be installed.
PRODUCT SPECIFICATIONS
Available Features
• HD 1080P, 30X PTZ
• Auto-Image Stabilization
• Audio Synchronization
• IK10 Vandal Resistant
• Designed for Division 1 Environments
• 110V/220V AC Input
• H.264 High Prole, MJPEG Compression
• Video Motion Detection
• Full 316L Stainless Steel System
• Class I for gaseous environments
• ATEX, and IECEX Certications Pending
• Compatible with Moog Poles for a Complete Solution
35
EXO Division 1 Explosion
EXO Division 1 Explosion Proof HD Camera
SPECIFICATIONS
Models Description
EXPD7C1D1-3S 30x optical zoom 1080P, Purge system, Class I Division 1, Groups A,B,C & D, Single mode ber connectivity
EXPD7C1D1-3M 30x optical zoom 1080P, Purge system, Class I Division 1, Groups A, B, C & D, Multimode ber connectivity
EXPD7C1D1-3E 30x optical zoom 1080P, Purge system, Class I Division 1, Groups A, B, C & D, Ethernet connectivity
GENERAL
Dome: OptiClear special Nylon blend
Housing Style: 316L stainless steel camera housing and purge control mechanism
Mounting Style: Wall mount
Net Weight: 25 lb (11.4 kg.)
Dimensions (H x W x D): Camera: 14.4” x 11.2” x 13.5” (367 x285 x 343mm) • Purge box: 16.6” x 16” x 6.7” (422 x 407 x 171mm)
Image Sensor: (30x) 1/2.8-type Exmor CMOS
UL Certifications: UL NFPA 496 Purged and Pressurized; UL NFPA 60950-1
UL HAZARD CLASSIFICATIONS
Class I, Division 1, Groups A, B, C & D: Flammable gases, vapors, or liquids: Acetylene, Hydrogen, Ethylene, and Propane
ATEX / IECEX CLASSIFICATIONS
Zone 1 and 2: For Ignitable Mixtures per CENELEC / IEC: EN 60079-0 /IEC 60079-0, EN 60079-2 /IEC 60079-2, EN 60079-11 /IEC 60079-11, EN 60079-7 /IEC 60079-7
PURGE SYSTEM SPECIFICATIONS
Supply Pressure Range: Supply Requirements:
Safe Pressure
Switch Setting (CI/CII):
Switch Conduit
(CI/CII) Flow Rate / Purge Rate Port Size
30-120 psi
(regulated pressure 20-25 psi)
Instrument air or inert gas 0
.65” w.c. 0.1 - 3.5 SCFH / 5 SCFM 0.15 / 0.5 + 0.02 ½” FPT
Mounting Pattern: Wall (4) 2” x 8” bolt pattern, .38” dia.
Power Input / Input Voltage: 110 / 120Vac, 15A
The EXPD7C1D1-3 is designed for environments where explosion hazards arise from ammable gases or vapors. EXO
Explosion Proof cameras isolate the hazard, via purging, with a supply of inert gas. Built to UL standards for hazardous
environments, the purged and pressurized enclosures are designed to meet UL and NFPA 496 requirements for electrical
equipment, and UL NFPA 60950-1 requirements for information technology equipment.
IK10
IK10