Specifications

Industrial Camera Systems – Protective Camera Enclosure
www.moogS3.com
PRODUCT OVERVIEW
Camera Snout Housing with Direct Nitrogen Cooling Installed with Camera, Lens and Lighting
PRODUCT SPECIFICATIONS
Available Features
• Controllable light intensity
• Complete build in ange ND-200 to adjust to already existing ange at site
• 45°, 56°, and 90° angled outlook
106
Nitrogen Cooled Housing
WUL - Nitrogen Cooled Camera Housing
SYSTEM COMPONENTS
FK-CM-3713
1/3” DSP-Color / Monochrome-CCD-Camera with Automatic Iris Control
Sensor: 1/3” CCD-Sensor
Scanning Area: 0.2” x 0.1” (4.8 x 3.6mm)
Picture Elements (H x V): 752 x 582
Sensitivity: 0.01 Lux (Color); 0.001 Lux (B/W)
Resolution (H): > 480 lines
Scanning: 625 lines CCIR, PAL / NTSC
Signal / Noise Ratio: > 48 dB
Electronic Shutter: Adjustable from 1/50 - 1/100,000/sec., in 9 steps
Integration: 2 to 510 elds available using menu selection, with option “picture freeze”
Video Output: FBAS 1,0 Vss 75 Ohm
White Balance: Manual / Automatic 2.500 - 10.500 K
Back Light Control: Digital zoom, pan, scroll, rotate, freeze
Switchable: Color bars, color, monochrome
AGC: 0-32dB
Serial Communications: RS-232C, 19.200 baud
One Cable Connector: Provides power, video and control
Power Requirement: 12Vdc
FRO-13-ZF-3307
Special Zoom Lens
Horizontal: 27° - 5°
Vertical: 20° - 4°
FC-Z-3307
Focus Control For Zoom Lens with End Switch and Motorized to use the Function from Control Desk
WUL-320-250-E
Camera Protective Housing for Nitrogen Cooling System
TBM-051
Temperature Monitoring Element, Switch Point: 50°C (122°F)
Contact Function:
1 opener by increase of temperature with BUK-2-01-2-pin female connector, with AST-2-01-2-pin male connector, includes 9.8” (250mm)
connecting cable
Controllable Light Intensity
Complete Build in Flange Nd-200 to Adjust to Already Existing Flange at Site
** Other camera types (e.g. sensors and lenses) available