Operating instructions

Anchor Jig Assembly

Figure 4

/32 "

11"

diameter

Before using the Anchor Jig verify that the center to center

dimensions between the bolts are even. If not, adjust

accordingly. Firmly tighten all Hex Nuts.

Anchor Jig Assembly

Figure 5

Standard installation without leveling nuts.

5 6

Anchor Jig Assembly

Figure 6

With Leveling Nuts

If, due to conditions or other requirements, leveling nuts are

needed, adjustments will have to be made to the Anchor Jig.

Leveling nuts and washers are NOT provided with

the pole,

Anchor Jig Assembly

Figure 7

NOTE: The Flat Washers, Lock Washers, and remaining Hex Nuts

will be used to fasten the pole to the Anchor Jig.

7 8

Sold Separately Sold Separately

Sold Separately