Operating instructions

Igloo Dome
Power 120VAC .
50/60 H
2.
300 WATTS.
Tools Required: Phillips Head Screwdriver.
Ceiling Support Wires(14 AWG wire min.)
Energía 120VAC.
50/60 H
2
.
300 VATIOS.
Las herramientas requirieron: Destornillador principal
Phillips.
Alambres de la ayuda del techo
(14 de alambre del AWG Min.)
Puissance 120VAC.
50/60 H
2
.
300 WATTS.
Outils requis : Tournevis phillips.
Fils de soutien de plafond (14 de fil d'A.W.G. mn)
Energie 120VAC.
50/60 H
2
.
300 WATT.
Werkzeuge erfordert: Kreuzkopfschraubenzieher.
Decken-Stützdrähte (14 AWG-Lehredraht Min.)
Poder 120VAC.
50/60 de H2.
300 WATTS.
As ferramentas exigiram: Chave de fenda principal de
Phillips.
Fios da sustentação do teto
(14 de fio Calibre de diâmetro de fios Min.)
Potere 120VAC.
50/60 di H2.
300 WATT.
Gli attrezzi hanno richiesto: Cacciavite phillips. Legare
di sostegno del soffitto
(14 del legare dell'AWG min.)
!!
Electrical Specifications
Français
Deutsch
Italiano
Portuguese
Español
English
Mechanical Options
1. Air ow sensor available to be combined with camera output systems
to monitor the eectiveness of air lter. If improper air ow is detected,
sensor will send alarm. If user by passes air ow sensor, air lter should
be changed approximately every 6 months (depending on monitoring
environment).
2. The Igloo Dome incorporates an automatic cool-down safety
precaution system which deactivates the power of both the camera and
cooling system when internal temperatures exceed 167°F (75°C). Once
safe operating conditions resume, the camera and cooling system will
reactivate.
3. Condensation and water run-o is a by product of the Igloo Dome's
cooling system. To prevent damage to the internal electrical
components, the Igloo Dome consists of a water run-o hose, located
underneath the optical dome. Please use caution that small amounts of
water accumulation will be present directly underneath the Igloo Dome,
resulting in slippery conditions.
* A 50/50 blend of propylene glycol and water has a freezing point of
-26°F. If lower temperature protection is required, it can readily be
attained by increasing the concentration of propylene glycol Antifreeze -
for example; a 60/40 blend of Antifreeze and water gives antifreeze
protection to -54°F.