Operating instructions

ManualsBrandsMoog Videolarm ManualsSecurity Camera AccessoriesFDP75C2N/AX

www.moogvideolarm.com

S M 5 C 8 N a n d S M 5 C F 8 N

PoE Ready™ Compact Vandal-Resistant Surface Mount Dome-5”

Installation and Operation Instructions for the following models:

SM5C8N Outdoor 5” PoE surface mount housing for small PTZ camera, conduit input from the

(SM5T8N) side and top of the housing, 30W PoE input, with heater and Dynamic Power Allocation™.

Polycarbonate body and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

SM5CF8N Outdoor 5” PoE surface mount housing for small xed camera, conduit input from the side and the

(SM5TF8N) top of the housing, 30W PoE input, with heater and Dynamic Power Allocation. Polycarbonate body

and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

SM5CF8NE Outdoor 5” PoE surface mount housing for small xed camera, conduit input from the

(SM5TF8NE) side and the top of the housing 30W PoE input, with heater and Dynamic Power Allocation.

Polycarbonate body and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

(no midspan included)

SM5C8NE Outdoor 5” PoE surface mount housing for small PTZ camera, conduit input from the side

(SM5T8NE) and the top of the housing 30W PoE input, with heater and Dynamic Power Allocation.

Polycarbonate body and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

(no midspan included)

Before attempting to connect or operate this product, please read these instructions completely.

81-IN5460

01-10-2013

Summary of content (16 pages)

PAGE 1
© 2013, Moog Videolarm, Inc. All Rights Reserved SM5C8N and SM5CF8N PoE Ready™ Compact Vandal-Resistant Surface Mount Dome-5” www.moogvideolarm.com Installation and Operation Instructions for the following models: SM5C8N (SM5T8N) Outdoor 5” PoE surface mount housing for small PTZ camera, conduit input from the side and top of the housing, 30W PoE input, with heater and Dynamic Power Allocation™. Polycarbonate body and clear/tinted dome. IP66, 1” NPT threads for pendant mount.
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 Do not block any of the ventilation openings. Install in accordance with the SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN manufacturers instructions. 8 Cable Runs- All cable runs must be within permissible distance.
PAGE 3
Limited Warranty for Moog Videolarm Products Moog Videolarm warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics* Five Poles/PolEvators™/CamEvator Three (3) Years Warrior Series™/Q-View™/IR Illuminators Five (5) Years SView Series™ Five (5) Years **6 months if used in auto scan/tour operation Controllers Five (5) Years Power Supplies Five (5) Years EcoKit Three (3) Years Accessory Brackets F
PAGE 4
! Electrical Specifications Power POE 56V SM5C8N Contents of Box SM5CF8N Input Power: 100 to 240VAC (Midspan) Power: 0.8A Frequency: 50 to 60 HZ output Camera: POE (55VDC) Heater: 56VDC (max. 20W) * English (1) Mounting Plate Energía de entrada: 100 a 240VAC (Midspan) Energía: 0.
PAGE 5
1 PACKETS (4) (8) For Surface Mounting Using Side Conduit Entrance (4) (1) Mounting Plate (1) 1/4 x 20 Bolt (1) 1/4 Flat Washer (1) 1/4 Lock Washer (4) M3 6mm Bolt (4) M3 Lock Washers (7) 8 x 32 x 3/8" bolts (2) 8 x 32 Nuts (2) 94-FSCT01 Fixed Etch knockout slightly with utility knife.
PAGE 6
For Surface Mounting Using Side Conduit Entrance Continued 2 WARNING: Ensure drill is level to avoid damage to the circuit board For Surface Mount Applications 3 2 1 3 Drill out (3) mounting holes as shown for # 10 hardware (not supplied) • Taladre (3) los agujeros de montaje como se muestra para # el hardware 10 (not supplied) • Percez (3) les trous de montage comme montré pour # le matériel 10 (not supplied) • Bohren Sie (3) Entlüftungslöcher wie gezeigt für # Hardware 10 heraus (not supplied) • Fur
PAGE 7
For Pendant Or Wall Mount Applications For Pendant Or Wall Mount Applications 6 7 Seal pipe threads with teflon tape supplied with outdoor housings. Thread housing to optional pendent pipe or wall mount bracket • Hilos de rosca de pipa del sello con la cinta del Teflon suministrada las cubiertas al aire libre. • Filetages de tuyauterie de joint avec la bande de teflon fournie avec les logements extérieurs. • Dichtungsrohrgewinde mit dem Teflonklebeband geliefert mit im Freiengehäusen.
PAGE 8
Arecont AV1315 / AV2815 / AV2805 / AV10005 Camera 10 REMOVE Remove center section from fixed camera bracket. Attach to mounting plate with hardware provided. Secure and complete wiring connections. • Quite la sección de centro del soporte fijo de la cámara. Ate a la pletina con el hardware proporcionado. Asegure y termine las conexiones del cableado. • Enlevez la section centrale de la parenthèse fixe d'appareil-photo. Attachez au plat de support avec le matériel fourni.
PAGE 9
Axis 212 PTZ Camera 12 (13mm) ½" (52mm) 2" Remove center section from fixed camera bracket. Attach to mounting plate with hardware provided. Secure and complete wiring connections. • Quite la sección de centro del soporte fijo de la cámara. Ate a la pletina con el hardware proporcionado. Asegure y termine las conexiones del cableado. • Enlevez la section centrale de la parenthèse fixe d'appareil-photo. Attachez au plat de support avec le matériel fourni.
PAGE 10
Panasonic BB-HCM381 / KX-HCM280A Camera 14 Use this hole pattern Install (4) .5” spacers to center bosses. • Instale (4) espaciadores del .5 los” para centrar los jefes. • Entretoises installez (4) .5 des » pour centrer des patrons. • Bringen Sie (4) .5“ Distanzscheiben an, um Chefs zu zentrieren. • Instale (4) espaçadores do .5” para centrar saliências. • Installi (4) distanziatori del .5„ per concentrarsi le sporgenze.
PAGE 11
Panasonic WV-NF284 / WV-NF302 Camera 16 (25mm) 1" Install (4) 1” spacer to center bosses. • Instale (4) 1” espaciador para centrar los jefes. • Installez (4) 1 » entretoise pour centrer des patrons. • Bringen Sie (4) 1“ Distanzscheibe an, um Chefs zu zentrieren. • Instale (4) 1” espaçador para centrar saliências. • Installi (4) 1„ distanziatore per concentrarsi le sporgenze. Secure camera quick release mounting plate with #8 hardware provided.
PAGE 12
Toshiba IKWB21A Camera 18 (13mm) ½" (26mm) 1" 1” spacers + (4) .5” spacers (4) corner bosses. Secure camera quick release mounting plate with ¼” hardware provided. • 1” espaciadores + (4) jefes de la esquina de los espaciadores del .5” (4). • Pletina segura del lanzamiento rápido de la cámara con el hardware ¼” proporcionado. • 1 » entretoises + (4) patrons faisants le coin des entretoises de .5 » (4). • Le plat de support bloqué de dégagement rapide d'appareil-photo avec le matériel ¼” a fourni.
PAGE 13
20 Press the Calibration button for one second. Both the Test and Heat LED will turn ON. Once the unit has been successfully calibrated, the Test and Heat LED will turn OFF. Once this is complete the Heat LED will turn ON only if the heater is ON. Reset • Pulse el botón de calibración durante un segundo. Tanto la prueba y el calor se encenderá. Una vez que la unidad ha sido calibrado correctamente, la prueba y el calor del LED se apagará.
PAGE 14
21 Install security screw, if desired 22 Attach lanyard loop to hook • Instale el tornillo de la seguridad, si está deseado • Ate el lazo del acollador al gancho • Installez la vis de sécurité, si désiré • Attachez la boucle de lanière au crochet • Bringen Sie Sicherheitsschraube an, wenn Sie gewünscht werden • Bringen Sie Abzuglinieschleife zum Haken an • Instale o parafuso da segurança, se desejado • Avviti la vite di sicurezza, se voluto 23 Secure Dome Assembly to housing • Asegure la asamble
PAGE 15
Replacement Parts List Item Number 1 5 3 2 6 Part Number 1 RP0SM5TR Replace Trim Ring Assembly 2 RPDC5 Dome and Gasket 3 RP40VL3586 SM5 Housing 4 RP95FSP01 1” NPT Plug 5 RPBACH8N Blower 6 RP762010 POE SM5 PCB 7 8 RPHACH8N Heater for POE Housing RPVL3790 Heater Bracket NS RP70VL9001G 7 8 4 Comments 30Watt Midspan
PAGE 16
Product Registration/Warranty Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest quality products available and superior customer service. Should a problem arise, rest assured that Moog Videolarm stands behind its products by offering impressive 3 Year and 5 Year warranties, depending on the product purchased. See full warranty details at www.moogvideolarm.