User Manual

31
FILTER ENVELOPE GATE
You can control whether the filter envelope is triggered
by the keyboard, by an external control-voltage source,
by both, or whether the filter is unaffected by the
envelope generator. Engage Shift mode and press
the BANK 3, PATCH 1, and PATCH 2 buttons. Pressing
the low C key leaves the gate open and bypasses the
envelope generator. When you press C#, only the
keyboard or a MIDI signal will trigger the envelope.
When you press D, only a gate signal routed from
an external source to the GATE CV jack will trigger
the envelope. When you press D#, the keyboard, a
MIDI signal, or an external gate signal will trigger the
envelope (default).
AMPLIFIER ENVELOPE TRIGGER MODE
As mentioned in the Envelopes Overview, by default,
playing legato on the Sub Phatty prevents envelopes
from retriggering on subsequent notes. With single
triggering, the Sub Phatty prevents envelopes from
retriggering on subsequent notes unless you’ve released
the previous key. With multiple triggering, a new gate
occurs each time you play a note on the keyboard,
regardless of whether you’ve released the previous key.
You can select single or multiple triggering separately for
the amplifier and filter envelopes.
To specify single or multiple triggering for the amplifier
envelope, engage Shift mode and press the BANK 4
and PATCH 1 buttons. Press the low C key to turn select
single triggering (default), or press the low C# key to
select multiple triggering.
AMPLIFIER ENVELOPE RESET
When Amplifier Envelope Reset is turned on, each new
note triggers the amplifier envelope to reset from zero,
so its output sweeps fully from zero to maximum with
each attack. By default, with envelope reset turned
off, an envelope Attack sweeps the envelope output
only from its current level to maximum. The effect of
Envelope Reset is more prominent with longer attack
and release times.
To change this function, engage Shift mode and press
the BANK 4 and PATCH 2 buttons. Pressing the low C
key turns Amplifier Envelope Reset off, and pressing C#
turns it on.
Gate Open (EG bypassed) Gate CV
KB or MIDI KB, MIDI, or Gate CV
Single Trigger
Multi Trigger
Amp. Env. Reset OFF
Amp. Env. Reset ON