User Manual

APPENDIX C - CARING FOR THE SIRIN

Clean the Sirin with a soft, slightly moist cloth only – do not use solvents

or abrasive detergents. Heed the safety warnings at the beginning of the

manual. Don’t drop the unit. If you are shipping your Sirin to the factory

for servicing, we recommend using the original shipping carton, or an ATA

approved Road Case.

AN IMPORTANT NOTE ABOUT SAFETY: Do not open the chassis. There are

no user serviceable parts in the Sirin. Maintenance of the Sirin

synthesizer should be referred to qualified service personnel only.

APPENDIX D - SPECIFICATIONS

TYPE: Programmable Monophonic Analog Synthesizer

SYNTH ENGINE:

Oscillator Section:

•OSCILLATOR 1:

Wave: Sawtooth/Square

Level: 0 to 100%

•OSCILLATOR 2:

Frequency: +/-12 Semitones

Wave: Sawtooth/Square

Level: 0 to 100%

•GLIDE RATE: 0 to 100%

Filter Section:

•CUTOFF: 20Hz to 20KHz

•RESONANCE: 0 to Self-Oscillation

•FILTER ENV. AMOUNT: -100% TO +100%

Envelope Generator Section (x2):

•ATTACK TIME: 1 msec to 30 sec

•DECAY TIME: 1 msec to 30 sec

•SUSTAIN LEVEL: 0 to 100%

•RELEASE TIME: 1 msec to 30 sec

•RELEASE: On/Off

Modulation Section:

•LFO RATE WITH RATE LED: 0.01 to 100Hz

•WAVE: Triangle

•AMOUNT TO VCO: 0 to 100%

•AMOUNT TO VCF: 0 to 100%