User Manual

GLIDE (AKA ‘portamento’) is a musical effect that makes smooth
changes in pitch between notes. Sirin’s GLIDE RATE is adjustable
from instantaneous to extremely long.
GLIDE
Each Oscillator (VCO 1 & VCO 2) has a dedicated level
knob that allows you to control the relative strength of
each oscillator from 0 to 100%. NOTE: The VCOs begin
to clip the filter at about 2 o’clock creating more
agressive sounds.
MIX (OSCILLATOR LEVELS)
PANEL CONTROLS FOR GLIDE
GLIDE Switch (CC# 65):
Enables/Disables the GLIDE function. GLIDE is on when the LED is on.
GLIDE RATE (CC# 5):
Sets the rate of GLIDE that occurs when the note controlling Sirin changes.
MIDI ACCESSIBLE CONTOL
GLIDE TYPE (CC# 92):
Sirin offers three GLIDE types: Linear Constant Rate (LCR), Linear Constant
Time (LCT), or Exponential (EXP). When LCR is selected, the GLIDE RATE stays
the same regardless of the interval. When LCT is selected, the GLIDE TIME stays
the same regardless of the interval. When EXP is selected, the GLIDE RATE follows
an exponential curve that starts fast and then slows as it approaches the target
note (like the Taurus).
Default = LCR.
LEGATO GLIDE (CC# 83):
Normally, GLIDE occurs with every new note. When LEGATO GLIDE is enabled,
however, GLIDE is only applied when a new note is received while another note
is still being held.
Default = OFF.
PANEL CONTROLS FOR THE MIXER
VCO 1 LVL (CC# 15):
Sets the level of VCO 1.
11