User Manual

SETUP MODE (continued)

PARAMETER SELECTION 9-16

To access values 9-16, press (SHIFT)+Step buttons 1-8 (9-16). The value is indicated by red

Octave/Location LEDs. If a setting is on the same LED as the current page, the LED will ash

alternately between the yellow page color and the green or red setting color.

PROGRAMMING THE ASSIGNABLE OUTPUT

Select Page 1, and then press Step buttons 1-8 for Assignable output modes 1-8,

and (SHIFT)+Step buttons 1-8 for Assignable output modes 9-16.

ASSIGNABLE OUTPUT MODES

1: Accent (Default)

2: Sequencer Clock

3: Sequencer Clock / 2

4: Sequencer Clock / 4

5: Sequencer Step Ramp

6: Sequencer Step Saw

7: Sequencer Step Triangle

8: Sequencer Step Random

9: Sequencer Step 1 Trigger Output

10: MIDI Velocity

11: MIDI Channel Pressure

12: MIDI Pitch Bend

13: MIDI CC 1

14: MIDI CC 2

15: MIDI CC 4

16: MIDI CC 7

SETTING A MIDI CHANNEL

Select Page 2, and then press Step buttons 1-8 for MIDI Channels 1-8, and (SHIFT)+Step buttons 1-8

for MIDI Channels 9-16.

PROGRAMMING THE TEMPO INPUT

Select Page 3, and then press Step buttons 1-3 to select the desired Tempo input behavior.

1: CV INPUT MODE

2: SINGLE CLOCK ADVANCE MODE

3: DIN SYNC MODE

Select Values 9-16