User Manual

Table Of Contents

SEQ 1 ASSIGN (VCO 1) (Continued)

SUB 2: When this button is engaged (lit), the output of Sequencer 1, as deﬁned by the positions of the

four STEP knobs, will modify the integer value of the SUB 2 FREQ knob. When this button is o (unlit),

SUB 2 will continue to play using the setting of the SUB 2 FREQ knob, maintaining a constant harmonic

relationship to VCO 1.

SEQUENCER 2

STEP 1 THROUGH STEP 4

The STEP knobs individually aect the values

set by the VCO 2 FREQ knob, and the associated

SUB 1 FREQ, and/or SUB 2 FREQ knobs, based on

the SEQ 2 ASSIGN buttons deﬁned below. In the

center position, no change is applied. Rotating the

STEP knob clockwise will add a control signal to

the selected frequency settings, producing a higher

pitch for this step. Rotating the STEP knob counter-

clockwise will subtract (by adding a negative

control signal) from the selected frequency

settings, producing a lower pitch for this step.

NOTE: The behavior of the individual STEP knobs is also

determined by the current setting of the QUANTIZE

button and the SEQ OCT button.

SEQ 2 ASSIGN (VCO 2)

These buttons allow the individual steps of Sequencer 2 to be

assigned to control the pitch of OSC 2 (VCO 2), the integer value of

SUB 1, the integer value of SUB 2, or any combination of the three.

OSC 2: When this button is engaged (lit), the output of Sequencer 2,

as deﬁned by the positions of the four STEP knobs, will modify the

value of the VCO 2 FREQ knob. The pitch of SUB 1 and SUB 2 will

also change as they maintain their constant harmonic relationship

with VCO 2.

SUB 1: When this button is engaged (lit), the output of Sequencer 2,

as deﬁned by the positions of the four STEP knobs, will modify the

value of the SUB 1 FREQ knob. When this button is o (unlit), SUB

1 will continue to play using the setting of the SUB 1 FREQ knob,

maintaining a constant harmonic relationship to VCO 2.

SUB 2: When this button is engaged (lit), the output of Sequencer 2,

as deﬁned by the positions of the four STEP knobs, will modify

the value of the SUB 2 FREQ knob. When this button is o (unlit),

SUB 2 will continue to play using the setting of the SUB 2 FREQ

knob, maintaining a constant harmonic relationship to VCO 2.

THE SEQUENCERS (Continued)