User Guide

SPECIFICATIONS

TYPE: Semi-Modular Analog Synthesizer

SOUND ENGINE: Analog

NUMBER OF KEYS: 32 Full-Size Keys

TYPE OF KEYS: Velocity-sensing (Velocity signal is not hard-wired – available via MIDI and

KBD VEL OUT jack)

OTHER CONTROLLERS: Pitch Bend, Mod Wheel, Variable Glide

POLYPHONY: Monophonic

SOUND SOURCES: 2 Oscillators with selectable Waveforms (Oscillator 2 supports Sync to Oscillator 1

plus linear FM), 1 White Noise Generator, External Input jack

VCF FILTER (LOW PASS): -24dB/Octave Moog Ladder Filter with Resonance (Self-Oscillating)

STATIC FILTER (HIGH PASS): -6dB/Octave

MOD SOURCES: Modulation Oscillator (Sine, Sawtooth, Ramp, Square), S/H Output, plus Envelope

and Key Tracking

ENVELOPE: Four-Stage (ADSR)

ATTENUATOR: Bipolar

MULT: Four Parallel-wired Non-buffered Patch Points

EFFECTS: Spring Reverb

ARPEGGIATOR / STEP SEQUENCER: (256 Steps; three Sequence Files)

PATCH POINTS:

41 x 3.5mm front and rear panels

21 Inputs

16 Outputs

4 Parallel-wired Mults.

AUDIO INPUT: One 1/4” TS jack (Rear Panel)

AUDIO OUTPUT: One 1/4” TRS jack for headphones or line level output (Rear Panel)

WARNING: Use a TS instrument cable for line output applications. Do not use a TRS (balanced) cable, or

phase cancellation may cause a very weak signal.

MIDI I/O: 5-pin DIN In, Out, Thru; plus MIDI over USB (Rear Panel)

DIMS: 23” (54.82cm) Wide x 14 1/4” (36.19cm) Deep x 5 1/2” (13.97cm) High

POWER: Included Power Adapter 12V DC (positive tip), 2A, 100 to 240 Volts AC, 50/60Hz

WEIGHT: 16lbs. / 7.25kg