User Guide

GLOBAL SETTINGS

To access Grandmother’s Global Settings, simultaneously press and hold the HOLD button (on the

Left-Hand Controller) and SYNC button (in Oscillator 1) until the SYNC button begins to blink. Now

you can use the keyboard commands listed below to make any needed changes to the Global Settings.

The SYNC button will continue to blink a number of times to indicate which Global Setting is currently

selected. When you have nished making any changes, simply press the SYNC button to exit the

Global Settings edit mode.

TIP: You can also double-tap your Global Settings selection on a white key to update a setting and exit

the edit mode.

NOTE: Global Settings are retained even when the power has been turned off.

For information on advanced Global Settings visit www.moogmusic.com/grandmother.

CHANGING THE MIDI CHANNEL

Grandmother can send and receive data on any MIDI channel. To select the MIDI channel, press the

(F#0) key, and then press one of the rst 16 white keys (F0 to G2) to select the corresponding MIDI

channel (1-16). The Default is MIDI Channel 1.

MIDI CLOCK INPUT

Grandmother’s Sequencer and Arpeggiator can be set to follow MIDI Clock, and can respond to Start and

Stop commands received via MIDI. Depending on your setup, you may wish for Grandmother to ignore

these commands. To change this setting, press the (G#0) key, and then use the rst three white keys to

select FOLLOW MIDI CLOCK + MIDI START/STOP COMMANDS (F0), FOLLOW MIDI CLOCK ONLY (Ignore

MIDI Start/Stop commands) (G0), or IGNORE ALL MIDI CLOCK + MIDI START/STOP COMMANDS (A0).

MIDI CLOCK OUTPUT

Grandmother’s Sequencer and Arpeggiator can be set to output MIDI Clock and Start and Stop

commands. Depending on your setup, you may wish for Grandmother not to send these commands.

To change this setting, press the (A#0) key, and then use the rst three white keys to select SEND MIDI

CLOCK + MIDI START/STOP COMMANDS (F0), SEND MIDI CLOCK ONLY (Don’t send MIDI Start/Stop

commands) (G0), or DON’T SEND MIDI CLOCK OR MIDI START/STOP COMMANDS (A0).

F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3