User Guide
20
ENVELOPE (ADSR) (Continued)
TRIGGER IN
A gate or trigger signal applied here will cause the Envelope to re-trigger and
advance through the ADSR stages as dened by their respective settings.
TECH NOTE: Any signal > 1.2 Volts will be read as a trigger.
+ ENV OUT
A control signal that reects the shape created by the current Envelope
generator settings is available at this output.
– ENV OUT
The control signal available via this output is an inverted copy of the signal
created by the Envelope. Instead of the Attack parameter raising a particular
value over time, inverse modulation values cause the Attack parameter to
lower a particular value by the same amount, in the same period of time.
OUTPUT
The Output module is home to parameters that determine how the nal sound is heard.
These include the output VOLUME knob, VCA (Voltage Controlled Amplier) MODE
switch, and the SPRING REVERB MIX knob.
SPRING REVERB