User Guide

10
MOD
The MOD wheel determines how much modulation is applied to the Filter Cutoff
frequency, the pitch of the Oscillators, and to the width of the Pulse waveforms.
It scales the overall amount of modulation from Off to the maximum settings
specied by the PITCH AMT, CUTOFF AMT, and PULSE WIDTH AMT knobs in the
MODULATION section.
GLIDE
Glide produces a smooth, continuous change in pitch between notes when
transitioning from one note to the next. The GLIDE knob sets the amount
of time needed to complete this transition. When the GLIDE knob is set to
minimum, there is no Glide effect. Raising the value of the GLIDE knob will
increase the Glide time between notes.
TIP: Legato glide is useful when creating acid-style sequences. To turn Legato
Glide On, continue to press the HOLD button while turning the GLIDE knob to
the right. To turn Legato Glide Off, continue to press the HOLD button while
turning the GLIDE knob to the left. The Default is Off.
OSCILLATORS
This is where the sound of the synthesizer is born. Grandmother
provides two oscillators of almost identical design, each with its
own Octave and Waveform settings. Oscillator 2 is equipped with
a FREQUENCY knob to detune it from Oscillator 1.
NOTE: There is a FINE TUNE knob located on the rear panel for
adjusting the overall tuning of the instrument.
.
LEFT HAND CONTROLLER (Continued)
MOD
32’
16’ 8’
4’ 16’
8’ 4’
2’
+
-