Owner's manual


NAV440UserManual
7430‐0131‐01Rev.F
Page53
ViewingCurrentConfiguration
Toviewthecurrentconfiguration,clicktheGetAll
Values rrentsettingswillbedispla
thetextfields.
Under
button.Thecu yedin
CurrentValue,aboxfilledwithbluecolor
indicatesthestatusfieldisenabled.Referto
Figure16.
ChangingConfigurations
Tochangeaconfigurationsetting:
1. Checkmarkthedesireditem(s)intheleftColum
pmenusin rightcolum ,selectthe
2. Usingthedro the n
newvalues.
3.
Selecteither
TemporaryorPermanent.
Temporary:Theconfigurationwillnotbestoredin
non‐volatilememory(EEPROM).Theconfiguration
willbeapplied,buttheunitwillreturntothe
Permanentconfigurationwhenitisrebooted.
Permanent:Theconfigurationwillbestoredinnon‐
llcontinuetousethe
tionafterb ooted.
volatilememory.Theunitwi
configura eingreb
4.
ClicktheSetValuesbutton.
Theconfigurationvalueswillbesavedasspecified:
TemporaryorPermanent.
Figure16UnitConfiguration
NOTE: InmostcasesaEnsurethatthesettingsselectedarecompatiblewiththesystemthatisbeingconfigured.
FAILmessagewillappearifincompatibleselectionsaremade.
NOTE:Unitorientationselectionsmustconformtotherighthandcoordinatesystemasnotedin440SeriesDefault
Coordinate
System,page22.Selectingorientationsthatdonotconformtothesecriteriaarenotallowed.
Adv
ing.
anced
TheAdvancedtabprovidesaccesstomorecomplexconfigurations,suchasuserbehaviorsett
