User manual

19
3.5.2、Cubase
*ConnectSTEEPtocomputer,opentheCubasesoftware.
*Createanewprojectandopenit.
*CreateanewMIDItrackorinstrumenttrackaccordingtoyourdemand.

Note:MIDItrackscanedit,recordMIDIcommands,orsendcommandsduringprojectplayback.Ifyouonly
wanttohavetheMIDIIN/OUT(controllingexternaldevice,orcontrolledbyanexternaldevice),youcan
createaMIDItrack.Instrumenttrackscanbeusedtoaddaninstrumentsource,getsoundactivatedbythe
editedMIDItrack,orgetsoundactivatedbytheMIDIINoftheSTEEPfromanexternaldevice.
*IntheMIDIIN/OUTmenuwhichisattheleftsideoftheselectedtrack,youcansetthe“ STEEPIIMIDIin”or
“STEEPIIMIDIout”.