Por table Guitar Effects
Contents ⽬录 Precautions 01 Main Features 01 Panel layout 02 Operational Guidance Preset Selection 04 04 Tone Setting 05 Tone Saving Quick Recall Buttons 06 07 Tap Tempo 07 Rhythm Setting 08 Tuner 08 AUX IN 09 System Setting 09 Connections 11 Batteries 12 Effects Explanation Specifications 13 15 Troubleshooting 15 Patch List 16
Precautions *Please read carefully before proceeding* Power Supply: Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 9V DC(±10%), , 300mA,center negative. Unplug the AC power adapter when not in use or during electrical storms. Connections: Always turn off the power and all other equipment before connecting or disconnecting. This will help prevent malfunction and damage to any of the devices.
Panel Layout 1 3 2 VALUE MODE 5 6 7 4 9 EFFECT ON/OFF 8 01 MODE:Control for scrolling through the various pages in the menu 02 LCD Display: Displays the User Interface and provides all information 03 for presets and parameters VALUE:Control for adjusting various parameters and selections within the User Interface.
10 11 12 13 14 10 INPUT:1/4” mono audio jack for connecting instrument 11 OUTPUT:Audio output 1/4” mono audio jack 12 AUX IN:Stereo line in for connection to external devices such as mp3 player for audio playback.
Operational Guidance Preset Selection 01 Power Connect the supplied power adaptor to the DC-IN jack located on the rear side. (9V, 300mA， ), Plugging a Jack cable into the input will activate the power when using batteries. 02 Master of Guitar Volume Adjust the master output volume 03 Preset Selection Rotate the MODE control until "PL" is highlighted brightly on the "EFFECTS CHAIN' panel. The LCD Display will indicate the information of the current preset(P or U) .
Note:The effects chain display panel will illuminate to indicate which effects blocks are currently active within the selected preset More details will be listed on page 16. Tone Settings There are 6 effect blocks containing 39 types of effects in PE100's effect Chain. Each effect block provides a different kind of effect. PL = Preset Mode DLY = Delay effects WAH = Wah Wah effects REV = Reverb effects DS = Overdrive and Distortion effects R.
Tone saving The tone can be saved as a User preset 01 Press the SAVE button 02 Rotate the VALUE knob to select which preset number you wish to save your tone in. You can save your tone in any user preset U01 to U99. When you have selected your desired preset slot press the VALUE control to continue. 03 Now you can edit the name of the preset. Rotate the VALUE control to scroll through the characters. Press the VALUE control to select a character and move onto the next character in the preset name.
Quick recall buttons The QUICK RECALL buttons A,B,C,D provide an easy way to instantly store and recall 4 of your favorite presets. To store a preset in a quick recall slot make sure that PL is highlighted using the MODE control. Navigate to the preset you wish to store in the quick recall slot using the VALUE control Hold the quick recall button (A,B,C,D) where you wish to save the preset, for more than 1 second.
Rhythm settings The PE100 contains 40 drum patterns and 10 metronomes. 01 Pressing the RHYTHM button at any time will start or stop the drum patterns and metronomes. 02 Rotate the MODE control until R.S is highlighted 03 Rotate the VALUE control to choose the DRUM or METRONOME. 04 Press the VALUE control to highlight the rhythm parameter and rotate the VALUE knob to choose which rhythm you want. 05 Press the VALUE control again and rotate it to edit the speed, the range is BPM40 to BPM260.
AUX IN Connect the output of your favorite external audio device, such as mp3 player, to this input using a mini stereo jack. System settings Rotate the MODE control until SY is selected. The system settings include the OUTPUT type, LCD B (brightness), LCD M (invert colors), RESET (factory RESET). 01 Select OUTPUT using the VALUE control, you can choose line out or amp out depending on what equipment you wish to connect your PE100 to.
02 Rotate the VALUE control to LCD B, press it. Rotate the VALUE control to edit the brightness of the LCD display screen. 03 Rotate the VALUE control to LCD M, press it. Rotate the VALUE control to invert the LCD display screens colors. 04 To perform a full factory reset of the PE100 rotate the VALUE control to highlight RESET and press it. Next you will be asked "are you sure to restore factory setting" select “YES” to perform a factory reset.
Connections VALUE MODE EFFECT 11 ON/OFF
Batteries 01 Turn off PE100 and open the battery compartment. 02 Equip two AAA size batteries and close the battery compartment.
Effect Explanation 01 WAH Name Specifications TOUCH WAH A dynamically responsive autowah effect FUNKY MONKEY Time based Auto Wah effect. 02 DS Name Specifications FLEX BOOST Based on MOOER FLEX BOOST boost pedal. PREAMP OD Based on DOD Overdrive Preamp/250 overdrive pedal TUBE DRIVE Based on IBANEZ TS9(TUBE SCREAMER) overdrive pedal. JUICER DRIVE Based on MOOER THE JUICER overdrive pedal. MODERN OD The overdrive of boosting the middle and gain. DISTORTION Hi-gain distortion pedal.
04 MOD Name Specifications CHORUS This effect creates a shining dimensional sound. FLANGER This effect produces an undulating and floating sound. T.FLANGER This effect produces an vocal undulating and floating sound. PHASER This effect creates a pulsing-like sound. STEP PHASER This effect creates a deep pulsing-like sound. TREMOLO This effect periodically influences the volume of the signal. PITCH This effect produces a sound which sounds like a pitch.
Specifications No. of Effect Modules: No. of Effect Types: Preset Patch Memory: User’s Preset Patch Memory: Input Jack： Output Jack： Headphone out： AUX IN: Power requirements： 6 modules 39 Effect types 99 patches 99 patches 1/4” mono audio jack 1/4” mono audio jack 1/8” stereo audio jack 1/8” stereo audio jack AC adapter 9V DC，300mA， Dimensions： Weight： Accessories： 137mmX81mmX32mm 230g Owner’s Manual，AC adapter 9V DC.
Patch List Name of preset No. Name of preset No.
No. Name of preset No.
MOOER AUDIO CO.,LTD Shenzhen, China www.mooeraudio.
