User Manual

BACK PANEL LAYOUT

POWER: Toggles power on/off to the ampliﬁer

AC IN: Connect 3 pin grounded AC power cord

POWER FUSE: Contains the main power protection fuse and a backup replacement fuse.

If the ampliﬁer cannot power on, inspect the protection fuse and replace if necessary.

T500mA - 220V-240V

T1000mA- 100V-120V

AC VOLTAGE: Select correct setting for your current region. Please note that the correct

POWER FUSE must also be installed. DO NOT change this setting with a power cord

connected to your ampliﬁer.

SPEAKER OUT: Connect to an external speaker with an impedance of 8Ω - 16Ω

EFFECTS LOOP : Easily integrate your favourite external effects by connecting them to

the effects loop

SEND – Effects send (preamp out) – Connect to the input of external effects

RETURN – Effects return (Power amp in) – Connect to the output of external effects

XLR OUT: Direct audio out with optional speaker cabinet simulation and ground lift

switch. For connection direct to PA or audio interface.

USB: Connect to computer for ﬁrmware updates