User Manual

Pedal Layout
2
1
3
4
5
1
6
10
8
7
9
1. LED:
Indicates the On/Off status of Pitch Step.
2. INPUT:
¼ inch audio input Jack
3. OUTPUT:
¼ inch audio output Jack
4. DC input:
Connect a 9v DC power supply centre pin negative
5. PRESSURE SENSOR PADS:
Place your foot here to activate the effect
in SENSOR setting
6. Touch Switch:
Put the pedastal in toe down position and apply
slight downward pressure to activate the effect in
SWITCH setting
7. SUB/UP/S+U:
Selects the range and direction of the pitch shifting
SUB：1 octave range. Toe down = -1 OCT
Heel down = Original pitch
UP: 1 octave range. Toe down = +1 OCT
Heel down = Original pitch
S+U：2 octave range. Toe down = +1 OCT
Heel down = -1 OCT
8. SENSOR/SWITCH：
Selects the method used for activation
of the effect
9. -OCT/+OCT:
Adjusts the pitch of the -OCT and +OCT
for custom range
10.HARMONY:
Selects between harmony and pitch shift modes
Press in for Harmony mode
(dry signal can be heard)
Press out for Pitch Shift mode
(no dry signal can be heard)
Specifications
MOOER AUDIO CO.,LTD
www.mooeraudio.com
Part No:
Input：1/4” mono audio jack.（Impedance: 1M Ohms）
Output：1/4” mono audio jack（Impedance: 100 Ohms）
Power requirements: 9V DC
Current Draw: 180 mA
Dimensions: 154.5mm(D)×73mm(W)×53mm(H)
Weight: 540g