Speaker CAB Simulator
CONTENTS PRECAUTIONS 01 INTRODUCTION MAIN FEATURES 02 SETUP 02 03-04 PEDAL LAYOUT 05 PRESET PAGE 06 EDITING PRESETS 07 POWER AMP SCREEN CAB/MIC SCREEN EQ SCREEN SAVING PRESETS 07 08 09-11 11 USB 12 CAB MODEL 13 MIC MODEL SPECIFICATIONS 14 15
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Power Supply Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 12V DC, ,center negative. Unplug the AC power adapter when not in use or during electrical storms. Connections Always turn off the power and all other equipment before connecting or disconnecting. This will help prevent malfunction and damage to any of the devices.
INTRODUCTION The MOOER RADAR is a full-featured professional speaker simulator which can be a permanent resident at the end of your pedalboard. Not only does it carry 30 cab models but it also has optional microphone and power amp simulation. Ideal for recording or hooked up to your favourite headphones for practice. The RADAR will transform your pedalboard into a complete guitar rig.
SETUP PEDALBOARD U01 1x8 Champer POWER CAB EQ PEDALBOARD Radar PREAMP DC 9V U01 1x8 Champer POWER CAB EQ CH/CAB Radar 03 MICRO PREAMP
SETUP AMPLIFIER PREAMP Radar SEND U01 1x8 Champer POWER CAB EQ AMPLIFIER EFFECTS AMPLIFIER SPEAKER OUT Load Box Radar U01 AMP 1x8 Champer POWER CAB EQ Line out Speaker out 04
PEDAL LAYOUT 1.INPUT Connect to your pedalboard or preamp output using a ¼” jack cable U01 4 1x8 Champer POWER CAB 1 EQ 2 2.OUTPUT Connect to a soundcard or mixing desk using a¼” jack cable for unbalanced output 1/4” TRS stereo jack cable for balanced output 3.HEADPHONE Connect to your headphones or soundcard using a 1/8” jack cable 3 5 4.SCREEN Displays all menu’s and relevant information 5.MENU Used to programme and edit RADAR 6.DC IN Connect to a12V DC power source 75 12V 7.
PRESET PAGE In the preset selection page the screen will display various information 03 U01 01 1x8 Champer 02 POWER EQ CAB 05 04 1. PRESET NUMBER 3. POWER AMP ON/OFF 2. CAB MODEL 4. CAB ON/OFF 5.
EDITING PRESETS Editing presets is very easy with the RADAR. All of the parameters and settings are spread out across 3 different edit screens.
CAB/MIC SCREEN U01 CAB ON MODEL 1.
EQ SCREEN RADAR contains 3 different post EQ sections which can be activated on the EQ screen.
EQ SCREEN Graphic.B Graphic.G U01 EQ/Hz 01 03 U01 Graphic.G EQ/Hz Graphic.B 110 -2.9 50 0.0 330 -0.5 120 0.0 800 -1.6 360 0.0 1.35K +5.3 800 0.0 2.00K +2.9 4.00K HP OUT BACK LP 5.00K 02 01 04 03 SAVE HP OUT BACK 0.0 LP OUT SAVE 1. FREQUENCIES Select the frequency for each band. These units are measured in Hz. 2. GAIN Adjust the level of boost or attenuation. These units are measured in +/- dB. 0.0 = no boost or attenuation 3.
EQ SCREEN Parametric U01 EQ/Hz Parametric FREQ DB Q A 40 0.0 0.50 B 40 0.0 0.50 C 40 0.0 0.50 D 40 0.0 0.50 OUT HP OUT HP SAVE BACK FREQ:Select the frequency for each band DB:Adjust the level of boost or attenuation Q:Adjust the Q value of the selected frequency adjustment HP:Activate and adjust a high pass filter LP:Activate and adjust a low pass filter SAVING PRESETS U01 CAB U01 U01 PRE SET PRE SET U01 U01 ON MODEL 1.
USB Connecting your RADAR cab sim to a Windows PC opens up a lot of nice extra features: Preset management for importing/exporting presets Fast and easy editing of preset parameters Downloading your favorite 3 r d party IR cab models to the device OFF U-1 U-2 U-3 El34 U-4 U-5 4.5 U-6 U-7 U-8 5.5 U-9 U-10 6.7 U-11 U-12 U-13 U-14 U-15 46 U-16 U-16 U-17 U-18 U-19 Download the PC software from WWW.MOOERAUDIO.COM and follow the instructions to get RADAR connected to your PC.
CAB MODEL CAB MODEL MODEL BASED ON Champer 1x8 Fender Champ Silverface V.Champer 1x8 Fender Vibro Champ Silverface Prince.B 1x10 Fender Princeton Tweed Prince.S 1x10 Fender 65'princeton reverb 65DLX 1x12 Fender 65 deluxe reverb 57DLX 1x12 Fender 57 tweed deluxe Kitty 1x12 Bad cat Ac15 1x12 Vox AC15C1 Twinverb.S 2x12 Fender 70'twin reverb silverface Twinverb.B 2x12 Fender 67'twin reverb blackface Matchbox 2x12 Matchless chieftain AC30.B 2x12 Vox V212H Alnico blue AC30.
MIC MODEL MIC MODEL MODEL Sm57 BASED ON Shure SM 57 Dynamic Sm58 Shure SM 58 Dynamic Md421 Sennheiser MD 421 Dynamic Md441 Sennheiser MD 441U Dynamic U47 Neumann U47 U87 Neumann U87 RodeNT1 Rode NT-1 MXL2001P Marshall MXL 2001P MXL2003 Marshall MXL 2003 C3000 AKG C3000 C4000B AKG C4000B Please Note: All manufacturers and brand names mentioned above are not affiliated with MOOER or RADAR 14
SPECIFICATIONS Input:1/4” mono audio jack.(Impedance: 100k Ω) Output:1/4” mono audio jack (Impedance: 470 Ω) 1/8” stereo audio jack (Impedance: 10 Ω) Sampling rate: 44.1K Sampling accuracy: 24bit Signal to noise ratio: 100dB Frequency Range: 20Hz~20KHz Power requirements:12V DC Only use the power supply provided Current Draw:300mA Dimensions:93.5mm(D) x 42mm(W) x 52mm(H) Weight:150g Accessories:Owner’s Manual, Power Supply *Notes:Any specification’s update will not be amended in this manual.
MOOER AUDIO CO.,LTD Shenzhen, China www.mooeraudio.