User Manual

3.SETTINGPROCEDURE
(1)Normalmode
●SettheAUDIOMODEtoNormal
●OpentheDAWsoftwareandset“ MOOERUSBAUDIO”asthedriver.Setoutputas“ Analogue1/Analogue2”ofGE250.
●SettheEffect/Dryoftheleftandrightoutputasyouwish.
●Createanewproject.Setanewtrackandplaytheguitartochecksoundwave.Ifthewaveisdistorted,decreasethe
RecVolumeOtherwise,increasetheRecVolume.
●RecordatracktocheckthePlayVolumeandadjustthePlayVolumeasyoudesire.
●Ifyourecordguitarwiththebackgroundmusicplaying,youcanadjusttheplayvolumeandthebackgroundtrack
volumebyusingMIX.Thehighervaluemeansalouderbackgroundtrack,thelowervaluemeanslouderplayvolume.
(2)REAMPmode
●REAMPmodecanaffectthedrysignaldeliveredbythecomputerandturnitintotheeffectsignal.
●OpentheDAWsoftwareandcreateanewproject.Settwonewtracks.Oneisforthedrysignal,theotherisforthe
blanktrack.
●Playthedrysignalandcheckifthewaveofsoundisdistortedornot.AdjusttheinputsignalbyadjustingtheRec
Volume.
●Duringplay,youcanedittheeffectschaininGE250asyouliketogetthebestresult.Theplaybackvolumecanbe
adjustedbyselectingPlayVol.
●SettheAUDIOMODEtoREAMP,selecttheblanktrack,andstartplayingandrecordingthedrysignal.Afterplaying
oftheblanktrackisdone,REAMPisfinished.
33