SDS

SAFETY DATA SHEET
SELF BALLASTED COMPACT FLOURESCENT LAMPS
Page 1 of 5
Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, and European Directives
SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION
1.1 Trade Name (as labeled):
SATCO: Self Ballasted Compact Fluorescent Lamps
Synonyms: None Applicable
CAS No: Not Applicable
1.2 Product Use: General lighting applications
1.3 Company Name: SATCO Products, Inc.
Company Address: 110 Heartland Blvd
Company Address Cont: Brentwood, NY 11717
Business Phone: [phone] or [phone]
Website:
www.satco.com
1.4 Emergency Telephone Number: [phone]
Date of Current Revision: January 23, 2018
Date of Last Revision: January 13, 2016
SECTION 2 - HAZARD IDENTIFICATION
EMERGENCY OVERVIEW: This data sheet is inclusive of all “White” CFL (Warm White, Cool White, Daylight) lamps
for general lighting applications. This data sheet is not intended to cover compact fluorescent for special application
including blacklight, germicidal, or colored lamps.
Health Hazards: Exposure to intact lamps does not pose any known health hazards.
Flammability Hazards: This product is not considered flammable.
Reactivity Hazards: None.
Environmental Hazards: The environmental effects of this product have not been investigated, however release may cause adverse
environmental effects.
US DOT Symbols: Not Regulated
GHS Symbols: None
Signal Word: None
2.1 GHS Labeling and Classification:
This product does not meet the definition of a hazardous substance or preparation as defined by OSHA via 29CFR 1910.1200 or by the
European Union Council Directives 67/548/EEC, 1999/45/EC, 1272/2008/EC and subsequent Directives.
This Safety Data Sheet is being provided to our customers as a courtesy and is not required by regulatory authorities because this product is
classified as an “article” which according to Title 29 of the Code of Federal Regulations, OSHA Part 1910.1200. “Article means a manufactured
item which is formed to a specific shape or design during manufacture which has end use function dependent in whole or in par
t upon its shape
or design during end use, and which under normal conditions of use does not release more than very small quantities or trace amounts of a
hazardous chemical, and does not pose a physical hazard or health risk to employees.” This product is odorless, stable, and poses no
immediate hazard to health. No material contained in a lamp is released during normal use and operation.
Components Contributing to Classification:
None applicable
2.2 Label Elements:
GHS Hazard Classifications:
None applicable
Hazard Stateme
nts:
None applicable
Prevention Statements:
None applicable
Response Statements:
None applicable
Storage Statements:
None applicable.
Disposal Statements: Dispose of contents/container in accordance with local/ regional/ national/
international regulations
2.3 Health Hazards or Risks From Exposure:
Symptoms of Overexposure by Route of Exposure:
The symptoms of overexposure are described in the following paragraphs.
Acute: None applicable to an intact lamp during normal use and operations.
Chronic: None applicable to an intact lamp during normal use and operations.
Target Organs:
Acute: None known
Chronic: None known