Instruction manual

The R720* / R820* is supplied with glass restones. To install the
restones remove the trim and door as shown in the previous section.
Follow these instructions to ensure all parts are removed or replaced
as required� Once the trim and glass door is removed, place the
restones randomly around the burners as shown in Figures 22
and 22a�
Note: DO NOT cover the burner with restones or any other
media�
Figure 22� Completed glass Firestone installation.
Figure 22a� Operating Propane gas replace with designer glass Firestones
surrounding burner tray.
Optional River Rocks
The R720*/R820* has the option of installing the cultured rocks
which mimic real stone� These may be spaced at random, or in
a visual pattern of your preference� See the Montigo web site for
photographs and ideas�
www�montigo�com
Do not operate this fireplace without the glass door or with a broken glass door.
NOTICE
Section 9: Installing the Firestones
Firestones
R720* requires nine 3lbs bags for a total of 27lbs of restones
R820* requires ten 3lbs bags for a total of 30lbs of restones
R720 & R820 Power Vent Indoor Gas Fireplace
Page 29
XG0772 - 100614
Installation