Specifications
must not be obstructed.
To clean the burners, you must remove the glass
door, logs, and burner screen.
With these parts removed, inspect all the holes
to make sure they are unobstructed. Use a small drill
or wire to clean any obstructed holes. Remove any
rust or other buildup that may have accumulated on
the burner or screen.
Replace parts in reverse order.
It is essential that the air ows freely into the
blower and out of the top grill. Do not place objects
in front of the grill.
Check blower annually for buildup caused by
dust and pet hair.
Air In
Air Out
An inspection of both the inner and outer pipes
of the venting system should be made during the an-
nual service appointment. There must be no blockage
and be in good repair. The vent manufacturer’s in-
structions may provide specic suggestions or details
on vent inspection. Any sections that are taken apart
for the inspection must be reassembled and sealed
as required.
During the annual inspection and maintenance
appointment, the service person should clean dust,
lint, and any light accumulation from the logs and
the rebox area. An extra-soft brush should be used
on the logs as they are extremely fragile; a vacuum
cleaner may be used on the rebox. If at any time
the logs cannot be removed or installed without forc-
ing, the cause must be found. The logs must never
be forced.
The appliance should be inspected before
service person. More frequent cleaning
may be required due to excessive lint
from carpeting, bedding material, etc. It
is imperative that control compartments,
burners and circulating air passageways of
the appliance be kept clean.
for any reason, reinstall per the instructions
The appliance area must be kept clear and
free from combustible materials, gasoline