Specifications



Only For Qualied Installers

Place conversion sticker (provided in Kit) on the valve. This

is to permanently mark the valve that it has been converted

to Natural Gas. This label is important in the event that the

valve is ever removed and mixed in with other valves.

Mark the proper box on the

label with a permanent marker.

Note: If no conversion is made,

the box for propane must still be

marked by the installer.



Note: The higher the orice number the smaller

hole in the tip. For example, a number 52 orice

has a larger hole than a number 60 orice.

Reinstall burner module back into the

stove with the four bolts that were

removed. Check gasket for damage

and replace if necessary. Check for gas

leaks when nished.



Verify gas inlet and manifold pressures are within the

specications on the appliance data plate located on the rear

of the unit.

NATURAL GAS

PROPANE